Elecraft Mini-module kit enclosures

All of the mini-module enclosures are made of Lexan, a polycarbonate, which is very strong. It also has a UV blocking coating on one side and is assembled carefully with this side on the outside of the enclosure. Lexan is more shatterproof than acrylic (Plexiglass etc.) but is more prone to scratching than acrylic. Since my design goal was to use the enclosures for portable field applications, being exposed to dropping and falling off a table, I decided to go with the strength of a polycarbonate material.

Currently, designs exist for the following Elecraft mini-module kits:

  • W1 140W Computing Wattmeter and SWR Bridge
  • AF1 Active Filter with Audio Amplifier
  • DL1 Wideband 20W Dummy Load
  • BL2  Wideband 1:1 & 4:1 (Switchable) 250W Balun
  • Elecraft Special Edition HexKey (in prototype development)
Select the picture of a desired enclosure below for more detailed information or go directly to the order page.

W1 Enclosure
 Finished%20W1.jpg
AF1 Enclosure
 W1-2.jpg
DL1 Enclosure W1-3.jpg
BL2 Enclosure W1-7.jpg
Hex Key Enclosure In Prototype Development